EMAIL US ANY TIME:
CALL US ANY TIME:
Reinforced PVC membrane (P)
Otai Polyvinyl Chloride (PVC) waterproofing membrane.
Keywords：
Category：
- Product description
- Scope of Application
- Installation Methods& Vedio
- Classic Projects Reference
-
- Commodity name: Reinforced PVC membrane (P)
Otai Polyvinyl Chloride (PVC) waterproofing membrane.
Otai Polyvinyl Chloride (PVC) waterproofing membrane is a type of new high macro-molecular waterproofing membrane by adding plasticizer , filler ,anti-oxidizer , ultraviolet light absorber and other auxiliaries with polyvinyl chloride resins as raw material.
Standard Specification
Width : 2.0m
Thickness : 1.2mm, 1.5mm. 1.8mm， 2.0mm
Length :20m
Product Features
1. High tensile strength , good elongation , strong applicability for base expansion or cracking deformation .
2. Large width ,high construction efficiency , small product consumption .
3.Good diffusion of water vapor , easy discharge of condensate , easy discharge of moisture left in the substrate
4. Root penetration resistance , chemical corrosion resistance and aging resistance ;
5. maintain good flexibility even at -25℃
6.High Security without open flame installation
7. It used for exposed ,service life 10 years ; if unexposed used , the service life can be 50-100 years .
8. The artificial weathering time of Otai PVC is not less than 4100 hours.
9.Anti-Wind reach 135 PSF
Technical Data Sheet
No.
Test Item
Index H
L
P
1 The thickness of resin layer above the reinforcement fabric/ mm ≥ -
-
0.40
2 Tensile property Maximum Tension N/cm ≥ -
120
250
Tensile Strength Mpa ≥ 10.0
-
-
Max Tension Elongation/ % ≥ -
-
15
Breaking Elongation/ %≥ 200
150
-
3 Heating treatment size change rate % ≤ 2.0
1.0
0.5
4 Low temperature bending -25 ℃ No.Crack
5 Water impermeability 0.3Mpa, 2h Impermeable
6 Impact resistance 0.5kg, m ,impermeable
7 Anti-static load -
-
20kg impermeable
8 Seam peel strength N/mm ≥ 4.0
4.0
3.0
9 Right -angle tear strength N/mm ≥ 50
-
-
10 Trapezoid tear strength N ≥ -
150
250
11 Water absorbing capability (70 ℃， 168h)%≤ After soaking
4.0
After airing
-0.4
12 Heat aging (115 ℃） Time/h 672
Appearance No bubble ,crack ,delamination , bonding and holes
Max tensile retention %≥ -
85
85
Elongation retention % ≥ 85
-
-
Tensile strength ( Max tension on )retention %≥ -
-
80
Breaking elongation retention /%≥ 80
80
-
Cold bending -20 ℃ No. Cracking
13 Chemical resistance Appearance No bubble ,crack ,delamination , bonding and holes
Max tensile retention %≥ -
85
85
Elongation retention % ≥ 85
-
-
Tensile strength ( Max tension on )retention %≥ -
-
80
Breaking elongation retention /%≥ 80
80
-
Cold bending -20 ℃ No. Cracking
14 Artificial Climate accelerating aging Time/h 1500
Appearance No bubble ,crack ,delamination , bonding and holes
Max tensile retention %≥ -
85
85
Elongation retention % ≥ 85
-
-
Tensile strength ( Max tension )retention %≥ -
-
80
Breaking elongation retention /%≥ 80
80
-
Cold bending -20 ℃ No. Cracking
Single-ply roof membrane artificial climate accelerating aging time is 2500h, no exposed used membrane no need to test artificial climate accelerating aging Certificates
CE Certificates
Key words:- Polyvinyl Chloride membrane
- 1.5mm polyester reinforced PVC waterproof membrane
- pvc waterproofing membrane
- roofing
- roof
-
Suitable for industrial and municipal construction exposed & unexposed roofs , garage roof , basement , subway , tunnel , caverns , bridge, landfills , sewage treatment pool and other underground waterproofing projects .
-
PVC Waterproofing Membrane Application for Basement Roofing Details Treatment Concrete Roof Mechanical Fixation Method Metal Roof Waterproofing The installation of PVC waterproofing membrane is combined with advanced and mature technology , and complete application . Hot air welding is adopted for the overlaps of membranes, and between membrane and prefabricated accessories . The Installation are basically categorized as ballasted system, full adhered system and mechanical attachment system .
Ballasted System
The membrane is installed by adhesive or metal battens at certain area .The remaining area is not attached . Overlaps is welded by hot air. The wind uplifting force is withheld by the weight of ballasted materials .
System Features
. Suitable for all types of different substrates
. Quick installation
.Low Installation cost ;
.Excellent weathering resistance
The installation method is suitable for green roofs , driving roofs , the often step roof and non-often step roofs covered with cobble stones or prefabricated blocks.
Fully -Adhered System
The PVC membrane is adhered to base with adhesive . Overlaps is welded by hot air .
System features
. For roofs with complicated structure;
. Light weight ;
. Strong wind uplift resistance ;
. Great looking
The installation method is suitable for concrete roofs and steel roofs with high density insulation boards .
Mechanical Fixation System
The roofing membrane is installed by special roofing screws with plates or battens to the basis like structural concrete ,steel deck or wooden deck ,etc. The Overlap between the seams of the membrane sheet is welded by hot air welder .
System Features
. Easy installation
. Strong wind resist
. High performance of cost ratio
. Light Weight
The installation method is suitable for concrete roofs , steel roofs , aluminum roofs .
-
Bangkok Airport Terminal
Thailand Power Plant
New Zealand East Garden Residential Project
South Korean Daewoo Automobile Factory
UK Londo Stadium
Irish Airport Anex
Mongolia GM Plant
Mongolia Biya Star Hotel
National University of Mongolia
Monglolia Sicence and Technology Museum
Tianjin Binhai International Airport
Tianjin Binhai transportation hub.
Liupanshui Utility Tunnel
Qingdao Jiaozhou Citizen Square
Fujian Pingtan Comprehensive Test Area Utility Tunnel
Tianjin Digital TV Building
CNOOC (Tianjin) R&D Base
CRCC(Tianjin) Building
Meijiang international exhibition center.
TEDA MSD Central Square
Kennametal (China) Co., Ltd.
Sino-Singapore Eco-City National Animation Park
Xuzhou Subway Line 2
Foshan Subway Line 2
Tianjin Subway Line 6
Golden Wutong garden
Taiyuan Rail Way South Station
Yixingfu Settlement House
Ninghe New City Settlement House
Previous page
Next page
Previous page
Homogeneous PVC membrane (H)
Next page
Related Products
Messages
We will contact you within one working day. Please pay attention to your email.
Tel: +86 2266331999 Ext.265
Fax: +86 2266331998
Direct Line : +86 15222 410519
Email: otai_sales@163.com
Copyright © 2024 Tianjin Binhai OTAi Waterproof Material Co., Ltd. All Rights Reserved.
Powered by 300.cn | SEO | Privacy Policy